local - How do I set up a mining pool server? - Bitcoin

Technical: Taproot: Why Activate?

This is a follow-up on https://old.reddit.com/Bitcoin/comments/hqzp14/technical_the_path_to_taproot_activation/
Taproot! Everybody wants it!! But... you might ask yourself: sure, everybody else wants it, but why would I, sovereign Bitcoin HODLer, want it? Surely I can be better than everybody else because I swapped XXX fiat for Bitcoin unlike all those nocoiners?
And it is important for you to know the reasons why you, o sovereign Bitcoiner, would want Taproot activated. After all, your nodes (or the nodes your wallets use, which if you are SPV, you hopefully can pester to your wallet vendoimplementor about) need to be upgraded in order for Taproot activation to actually succeed instead of becoming a hot sticky mess.
First, let's consider some principles of Bitcoin.
I'm sure most of us here would agree that the above are very important principles of Bitcoin and that these are principles we would not be willing to remove. If anything, we would want those principles strengthened (especially the last one, financial privacy, which current Bitcoin is only sporadically strong with: you can get privacy, it just requires effort to do so).
So, how does Taproot affect those principles?

Taproot and Your /Coins

Most HODLers probably HODL their coins in singlesig addresses. Sadly, switching to Taproot would do very little for you (it gives a mild discount at spend time, at the cost of a mild increase in fee at receive time (paid by whoever sends to you, so if it's a self-send from a P2PKH or bech32 address, you pay for this); mostly a wash).
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash, so the Taproot output spends 12 bytes more; spending from a P2WPKH requires revealing a 32-byte public key later, which is not needed with Taproot, and Taproot signatures are about 9 bytes smaller than P2WPKH signatures, but the 32 bytes plus 9 bytes is divided by 4 because of the witness discount, so it saves about 11 bytes; mostly a wash, it increases blockweight by about 1 virtual byte, 4 weight for each Taproot-output-input, compared to P2WPKH-output-input).
However, as your HODLings grow in value, you might start wondering if multisignature k-of-n setups might be better for the security of your savings. And it is in multisignature that Taproot starts to give benefits!
Taproot switches to using Schnorr signing scheme. Schnorr makes key aggregation -- constructing a single public key from multiple public keys -- almost as trivial as adding numbers together. "Almost" because it involves some fairly advanced math instead of simple boring number adding, but hey when was the last time you added up your grocery list prices by hand huh?
With current P2SH and P2WSH multisignature schemes, if you have a 2-of-3 setup, then to spend, you need to provide two different signatures from two different public keys. With Taproot, you can create, using special moon math, a single public key that represents your 2-of-3 setup. Then you just put two of your devices together, have them communicate to each other (this can be done airgapped, in theory, by sending QR codes: the software to do this is not even being built yet, but that's because Taproot hasn't activated yet!), and they will make a single signature to authorize any spend from your 2-of-3 address. That's 73 witness bytes -- 18.25 virtual bytes -- of signatures you save!
And if you decide that your current setup with 1-of-1 P2PKH / P2WPKH addresses is just fine as-is: well, that's the whole point of a softfork: backwards-compatibility; you can receive from Taproot users just fine, and once your wallet is updated for Taproot-sending support, you can send to Taproot users just fine as well!
(P2WPKH and P2WSH -- SegWit v0 -- addresses start with bc1q; Taproot -- SegWit v1 --- addresses start with bc1p, in case you wanted to know the difference; in bech32 q is 0, p is 1)
Now how about HODLers who keep all, or some, of their coins on custodial services? Well, any custodial service worth its salt would be doing at least 2-of-3, or probably something even bigger, like 11-of-15. So your custodial service, if it switched to using Taproot internally, could save a lot more (imagine an 11-of-15 getting reduced from 11 signatures to just 1!), which --- we can only hope! --- should translate to lower fees and better customer service from your custodial service!
So I think we can say, very accurately, that the Bitcoin principle --- that YOU are in control of your money --- can only be helped by Taproot (if you are doing multisignature), and, because P2PKH and P2WPKH remain validly-usable addresses in a Taproot future, will not be harmed by Taproot. Its benefit to this principle might be small (it mostly only benefits multisignature users) but since it has no drawbacks with this (i.e. singlesig users can continue to use P2WPKH and P2PKH still) this is still a nice, tidy win!
(even singlesig users get a minor benefit, in that multisig users will now reduce their blockchain space footprint, so that fees can be kept low for everybody; so for example even if you have your single set of private keys engraved on titanium plates sealed in an airtight box stored in a safe buried in a desert protected by angry nomads riding giant sandworms because you're the frickin' Kwisatz Haderach, you still gain some benefit from Taproot)
And here's the important part: if P2PKH/P2WPKH is working perfectly fine with you and you decide to never use Taproot yourself, Taproot will not affect you detrimentally. First do no harm!

Taproot and Your Contracts

No one is an island, no one lives alone. Give and you shall receive. You know: by trading with other people, you can gain expertise in some obscure little necessity of the world (and greatly increase your productivity in that little field), and then trade the products of your expertise for necessities other people have created, all of you thereby gaining gains from trade.
So, contracts, which are basically enforceable agreements that facilitate trading with people who you do not personally know and therefore might not trust.
Let's start with a simple example. You want to buy some gewgaws from somebody. But you don't know them personally. The seller wants the money, you want their gewgaws, but because of the lack of trust (you don't know them!! what if they're scammers??) neither of you can benefit from gains from trade.
However, suppose both of you know of some entity that both of you trust. That entity can act as a trusted escrow. The entity provides you security: this enables the trade, allowing both of you to get gains from trade.
In Bitcoin-land, this can be implemented as a 2-of-3 multisignature. The three signatories in the multisgnature would be you, the gewgaw seller, and the escrow. You put the payment for the gewgaws into this 2-of-3 multisignature address.
Now, suppose it turns out neither of you are scammers (whaaaat!). You receive the gewgaws just fine and you're willing to pay up for them. Then you and the gewgaw seller just sign a transaction --- you and the gewgaw seller are 2, sufficient to trigger the 2-of-3 --- that spends from the 2-of-3 address to a singlesig the gewgaw seller wants (or whatever address the gewgaw seller wants).
But suppose some problem arises. The seller gave you gawgews instead of gewgaws. Or you decided to keep the gewgaws but not sign the transaction to release the funds to the seller. In either case, the escrow is notified, and if it can sign with you to refund the funds back to you (if the seller was a scammer) or it can sign with the seller to forward the funds to the seller (if you were a scammer).
Taproot helps with this: like mentioned above, it allows multisignature setups to produce only one signature, reducing blockchain space usage, and thus making contracts --- which require multiple people, by definition, you don't make contracts with yourself --- is made cheaper (which we hope enables more of these setups to happen for more gains from trade for everyone, also, moon and lambos).
(technology-wise, it's easier to make an n-of-n than a k-of-n, making a k-of-n would require a complex setup involving a long ritual with many communication rounds between the n participants, but an n-of-n can be done trivially with some moon math. You can, however, make what is effectively a 2-of-3 by using a three-branch SCRIPT: either 2-of-2 of you and seller, OR 2-of-2 of you and escrow, OR 2-of-2 of escrow and seller. Fortunately, Taproot adds a facility to embed a SCRIPT inside a public key, so you can have a 2-of-2 Taprooted address (between you and seller) with a SCRIPT branch that can instead be spent with 2-of-2 (you + escrow) OR 2-of-2 (seller + escrow), which implements the three-branched SCRIPT above. If neither of you are scammers (hopefully the common case) then you both sign using your keys and never have to contact the escrow, since you are just using the escrow public key without coordinating with them (because n-of-n is trivial but k-of-n requires setup with communication rounds), so in the "best case" where both of you are honest traders, you also get a privacy boost, in that the escrow never learns you have been trading on gewgaws, I mean ewww, gawgews are much better than gewgaws and therefore I now judge you for being a gewgaw enthusiast, you filthy gewgawer).

Taproot and Your Contracts, Part 2: Cryptographic Boogaloo

Now suppose you want to buy some data instead of things. For example, maybe you have some closed-source software in trial mode installed, and want to pay the developer for the full version. You want to pay for an activation code.
This can be done, today, by using an HTLC. The developer tells you the hash of the activation code. You pay to an HTLC, paying out to the developer if it reveals the preimage (the activation code), or refunding the money back to you after a pre-agreed timeout. If the developer claims the funds, it has to reveal the preimage, which is the activation code, and you can now activate your software. If the developer does not claim the funds by the timeout, you get refunded.
And you can do that, with HTLCs, today.
Of course, HTLCs do have problems:
Fortunately, with Schnorr (which is enabled by Taproot), we can now use the Scriptless Script constuction by Andrew Poelstra. This Scriptless Script allows a new construction, the PTLC or Pointlocked Timelocked Contract. Instead of hashes and preimages, just replace "hash" with "point" and "preimage" with "scalar".
Or as you might know them: "point" is really "public key" and "scalar" is really a "private key". What a PTLC does is that, given a particular public key, the pointlocked branch can be spent only if the spender reveals the private key of the given public key to you.
Another nice thing with PTLCs is that they are deniable. What appears onchain is just a single 2-of-2 signature between you and the developemanufacturer. It's like a magic trick. This signature has no special watermarks, it's a perfectly normal signature (the pledge). However, from this signature, plus some datta given to you by the developemanufacturer (known as the adaptor signature) you can derive the private key of a particular public key you both agree on (the turn). Anyone scraping the blockchain will just see signatures that look just like every other signature, and as long as nobody manages to hack you and get a copy of the adaptor signature or the private key, they cannot get the private key behind the public key (point) that the pointlocked branch needs (the prestige).
(Just to be clear, the public key you are getting the private key from, is distinct from the public key that the developemanufacturer will use for its funds. The activation key is different from the developer's onchain Bitcoin key, and it is the activation key whose private key you will be learning, not the developer's/manufacturer's onchain Bitcoin key).
So:
Taproot lets PTLCs exist onchain because they enable Schnorr, which is a requirement of PTLCs / Scriptless Script.
(technology-wise, take note that Scriptless Script works only for the "pointlocked" branch of the contract; you need normal Script, or a pre-signed nLockTimed transaction, for the "timelocked" branch. Since Taproot can embed a script, you can have the Taproot pubkey be a 2-of-2 to implement the Scriptless Script "pointlocked" branch, then have a hidden script that lets you recover the funds with an OP_CHECKLOCKTIMEVERIFY after the timeout if the seller does not claim the funds.)

Quantum Quibbles!

Now if you were really paying attention, you might have noticed this parenthetical:
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash...)
So wait, Taproot uses raw 32-byte public keys, and not public key hashes? Isn't that more quantum-vulnerable??
Well, in theory yes. In practice, they probably are not.
It's not that hashes can be broken by quantum computes --- they're still not. Instead, you have to look at how you spend from a P2WPKH/P2PKH pay-to-public-key-hash.
When you spend from a P2PKH / P2WPKH, you have to reveal the public key. Then Bitcoin hashes it and checks if this matches with the public-key-hash, and only then actually validates the signature for that public key.
So an unconfirmed transaction, floating in the mempools of nodes globally, will show, in plain sight for everyone to see, your public key.
(public keys should be public, that's why they're called public keys, LOL)
And if quantum computers are fast enough to be of concern, then they are probably fast enough that, in the several minutes to several hours from broadcast to confirmation, they have already cracked the public key that is openly broadcast with your transaction. The owner of the quantum computer can now replace your unconfirmed transaction with one that pays the funds to itself. Even if you did not opt-in RBF, miners are still incentivized to support RBF on RBF-disabled transactions.
So the extra hash is not as significant a protection against quantum computers as you might think. Instead, the extra hash-and-compare needed is just extra validation effort.
Further, if you have ever, in the past, spent from the address, then there exists already a transaction indelibly stored on the blockchain, openly displaying the public key from which quantum computers can derive the private key. So those are still vulnerable to quantum computers.
For the most part, the cryptographers behind Taproot (and Bitcoin Core) are of the opinion that quantum computers capable of cracking Bitcoin pubkeys are unlikely to appear within a decade or two.
So:
For now, the homomorphic and linear properties of elliptic curve cryptography provide a lot of benefits --- particularly the linearity property is what enables Scriptless Script and simple multisignature (i.e. multisignatures that are just 1 signature onchain). So it might be a good idea to take advantage of them now while we are still fairly safe against quantum computers. It seems likely that quantum-safe signature schemes are nonlinear (thus losing these advantages).

Summary

I Wanna Be The Taprooter!

So, do you want to help activate Taproot? Here's what you, mister sovereign Bitcoin HODLer, can do!

But I Hate Taproot!!

That's fine!

Discussions About Taproot Activation

submitted by almkglor to Bitcoin [link] [comments]

small passive income while browsing the web

Introduction
If you were on the internet in the late 1990s, you might remember companies like "AllAdvantage" that promised to pay you to browse the web. You could install a program that tracked your browsing and showed you targeted ads at the top of the screen, then "AllAdvantage" would give you a cut of the ad revenue you generated.
These schemes largely disappeared after the dot-com crash. But Brendan Eich, the creator of the JavaScript programming language and cofounder and former CTO of Mozilla, thinks his company Brave Software has found a way to revive that old idea.
What is it?
Brave makes a browser based on Google Chrome that blocks tracking scripts and other technologies that spy on your online activity. As a result, it also blocks many web ads; if you visit any website using the Brave browser, you won’t see any ads. But Brave will give users the option to see ads that Eich says will respect your privacy. The ads will appear as desktop notifications, he says, not as replacements for the ads the Brave browser blocks. So you still won’t see ads on any website, but you might see them on the right lower corner of your screen. If you choose to see these ads, you’ll get 70 percent of the revenue they generate.
Eich hopes Brave can solve two of the web's most vexing problems the privacy and revenue problem by turning the traditional digital advertising model on its head. Today, ad networks pay sites for ad space and web browsers like Brave and Chrome deliver content from those publishers to users. Brave is trying to put the browser in the center of the advertising experience. Instead of paying publishers directly, ad networks would pay Brave, which will pass part of the money to users and keep a cut for itself.
By handling advertising in the browser on your device, Brave says it will be able to target ads without sending your data to the cloud, and protect your privacy. When you interact with an ad on Brave, the browser sends notice to the company's servers, but doesn't include any identifying information. Eich sees four sets of winners: browser makers get paid; users get paid, and get more privacy; advertisers can target pitches without running afoul of European privacy regulations; and publishers can survive in a world where many users are installing ad blockers.
Publishers and ad networks might bristle at the idea of putting browser makers in the middle of their business. But in recent years browsers have taken a more active role in shaping the web, instead of merely displaying a website’s content. Chrome now blocks ads on a small number of sites with particularly egregious advertising practices, while browsers like Firefox and Safari have added privacy protections. Meanwhile, browser plugins are giving users more control over their experience. There are Chrome extensions, for example, that let you change Facebook's color scheme, or change the way images are displayed on Pinterest. And of course there are extensions that block all ads.
Trying to win advertisers and publishers to a new model isn't Brave's only challenge. It also needs users. Eich says Brave has 15 million users and is growing.
Brave will give users a 70 percent cut of its advertising revenue, which Eich estimates could work out to about $10 a month. Brave will pay users with its own bitcoin-style "cryptocurrency” called Basic Attention Tokens or BAT, which has traded for as little as 24 cents over the past 12 months, according to CoinMarketCap. You can exchange the BAT you have received for viewing ads into USD, EUR, GBP, CHF and many more currencies.
The company offers a service through the cryptocurrency exchange Uphold to allow users to change, sell and buy BAT or donate it to publishers, and for publishers to exchange the BAT they receive for dollars. Advertisers like HomeDepot or recent campaigns included brands such as Verizon, Newegg, Chipotle, and PayPal/Honey, in addition to earlier campaigns by Amazon, Harry’s Razors, Intel, CBS, KIND snacks, Logitech, Lenovo, Grubhub, Belkin, Quickbooks, Evernote and some of cryptocurrency related companies, will be able to buy ads either with BAT or with traditional currencies.
Eich says Brave opted to create its own tokens using the Ethereum cryptocurrency platform in part to avoid regulatory requirements, such as verifying users' identifies, that partners like Uphold are better equipped to handle.
Estimated revenue? (depending on the country you live in the revenue can be higher or lower)
I made around 3oo$ so far this year using 3 devices, just for viewing some ads.
5 months so far july is not included if you calculate it down for 1 device, 100$/5months = 20$ a month just for viewing ads, you would need to buy risky stocks worth of 2000$ to get the same amount per month.
can only recommend everyone to try it, not every country has the same number of advertisers so you probably get the most out of it when you live in the USA.
If you are interested here is a quick guide how to set it up to get the max amount out of Brave:
Quickstartguide:
1 Download brave here
2 Activate the reward system (gif link below)Gif link
3 go into the settings an deactivate auto contribution and activate 5 ads per hour (image link below)image link
4 Create an Account on Uphold and connect it with your BraveBrowser.
Now you are good to go and can make some money on something you do anyway.
I hope this helps some folks in the community to make some extra bucks.
edit1:you can find more infos and support here:brave_browser & BATProject or www.brave.com
edit2:the earnings are depenging on the number of devices you are using and were you are living. Best paying countries: United States (69) United Kingdom (39) Canada (36) Australia (35) New Zealand (26) Germany (21) Ireland (21) France (18)( the number next to the country are the companies that are running ads on brave for this particular country, the more companies the more revenue )
you can find a full list with all countries and campaigns here: https://brave.com/transparency/
edit3:You don't need to browse to a certain website to receive ads, just browse as you are used to, play browser games, watch videos on youtube or do whatever you want.Sometimes Ads appear on the startpage looks like that https://i.imgur.com/5tohhRc.jpg and after some time on the right lower corner a clickable pop-up appears looks like that->https://i.imgur.com/CTGdVsu.png
edit4:If you want to import your bookmarks and settings from your old browser:on the right top corner of the browser is a button ->https://i.imgur.com/oi8EAri.jpg click it > than on settings > and than you got the option to import bookmarks and settings from your old browser.
If you want to sync brave between devices and for backups:type brave://flags/ into the adressbar and than brave sync into the search bar and acticate itif its enabled it should look like this https://imgur.com/a/tCMDgDjthan just click on sync ->https://i.imgur.com/oi8EAri.jpg
here is a guide ->https://support.brave.com/hc/en-us/articles/360021218111-How-do-I-set-up-Sync
edit5: Don't keep your BAT from free token grants to long in your browser, always send your bat to an external wallet or exchange like uphold, only tokens from free token grants have an expire date if they dont get used they go back to the bat pool. you can find more infos about this here -> https://support.brave.com/hc/en-us/articles/360018305731-Why-does-my-BAT-have-an-expiration-date-
submitted by OnlyReveal6 to beermoneyglobal [link] [comments]

[ Bitcoin ] Technical: Taproot: Why Activate?

Topic originally posted in Bitcoin by almkglor [link]
This is a follow-up on https://old.reddit.com/Bitcoin/comments/hqzp14/technical_the_path_to_taproot_activation/
Taproot! Everybody wants it!! But... you might ask yourself: sure, everybody else wants it, but why would I, sovereign Bitcoin HODLer, want it? Surely I can be better than everybody else because I swapped XXX fiat for Bitcoin unlike all those nocoiners?
And it is important for you to know the reasons why you, o sovereign Bitcoiner, would want Taproot activated. After all, your nodes (or the nodes your wallets use, which if you are SPV, you hopefully can pester to your wallet vendoimplementor about) need to be upgraded in order for Taproot activation to actually succeed instead of becoming a hot sticky mess.
First, let's consider some principles of Bitcoin.
I'm sure most of us here would agree that the above are very important principles of Bitcoin and that these are principles we would not be willing to remove. If anything, we would want those principles strengthened (especially the last one, financial privacy, which current Bitcoin is only sporadically strong with: you can get privacy, it just requires effort to do so).
So, how does Taproot affect those principles?

Taproot and Your /Coins

Most HODLers probably HODL their coins in singlesig addresses. Sadly, switching to Taproot would do very little for you (it gives a mild discount at spend time, at the cost of a mild increase in fee at receive time (paid by whoever sends to you, so if it's a self-send from a P2PKH or bech32 address, you pay for this); mostly a wash).
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash, so the Taproot output spends 12 bytes more; spending from a P2WPKH requires revealing a 32-byte public key later, which is not needed with Taproot, and Taproot signatures are about 9 bytes smaller than P2WPKH signatures, but the 32 bytes plus 9 bytes is divided by 4 because of the witness discount, so it saves about 11 bytes; mostly a wash, it increases blockweight by about 1 virtual byte, 4 weight for each Taproot-output-input, compared to P2WPKH-output-input).
However, as your HODLings grow in value, you might start wondering if multisignature k-of-n setups might be better for the security of your savings. And it is in multisignature that Taproot starts to give benefits!
Taproot switches to using Schnorr signing scheme. Schnorr makes key aggregation -- constructing a single public key from multiple public keys -- almost as trivial as adding numbers together. "Almost" because it involves some fairly advanced math instead of simple boring number adding, but hey when was the last time you added up your grocery list prices by hand huh?
With current P2SH and P2WSH multisignature schemes, if you have a 2-of-3 setup, then to spend, you need to provide two different signatures from two different public keys. With Taproot, you can create, using special moon math, a single public key that represents your 2-of-3 setup. Then you just put two of your devices together, have them communicate to each other (this can be done airgapped, in theory, by sending QR codes: the software to do this is not even being built yet, but that's because Taproot hasn't activated yet!), and they will make a single signature to authorize any spend from your 2-of-3 address. That's 73 witness bytes -- 18.25 virtual bytes -- of signatures you save!
And if you decide that your current setup with 1-of-1 P2PKH / P2WPKH addresses is just fine as-is: well, that's the whole point of a softfork: backwards-compatibility; you can receive from Taproot users just fine, and once your wallet is updated for Taproot-sending support, you can send to Taproot users just fine as well!
(P2WPKH and P2WSH -- SegWit v0 -- addresses start with bc1q; Taproot -- SegWit v1 --- addresses start with bc1p, in case you wanted to know the difference; in bech32 q is 0, p is 1)
Now how about HODLers who keep all, or some, of their coins on custodial services? Well, any custodial service worth its salt would be doing at least 2-of-3, or probably something even bigger, like 11-of-15. So your custodial service, if it switched to using Taproot internally, could save a lot more (imagine an 11-of-15 getting reduced from 11 signatures to just 1!), which --- we can only hope! --- should translate to lower fees and better customer service from your custodial service!
So I think we can say, very accurately, that the Bitcoin principle --- that YOU are in control of your money --- can only be helped by Taproot (if you are doing multisignature), and, because P2PKH and P2WPKH remain validly-usable addresses in a Taproot future, will not be harmed by Taproot. Its benefit to this principle might be small (it mostly only benefits multisignature users) but since it has no drawbacks with this (i.e. singlesig users can continue to use P2WPKH and P2PKH still) this is still a nice, tidy win!
(even singlesig users get a minor benefit, in that multisig users will now reduce their blockchain space footprint, so that fees can be kept low for everybody; so for example even if you have your single set of private keys engraved on titanium plates sealed in an airtight box stored in a safe buried in a desert protected by angry nomads riding giant sandworms because you're the frickin' Kwisatz Haderach, you still gain some benefit from Taproot)
And here's the important part: if P2PKH/P2WPKH is working perfectly fine with you and you decide to never use Taproot yourself, Taproot will not affect you detrimentally. First do no harm!

Taproot and Your Contracts

No one is an island, no one lives alone. Give and you shall receive. You know: by trading with other people, you can gain expertise in some obscure little necessity of the world (and greatly increase your productivity in that little field), and then trade the products of your expertise for necessities other people have created, all of you thereby gaining gains from trade.
So, contracts, which are basically enforceable agreements that facilitate trading with people who you do not personally know and therefore might not trust.
Let's start with a simple example. You want to buy some gewgaws from somebody. But you don't know them personally. The seller wants the money, you want their gewgaws, but because of the lack of trust (you don't know them!! what if they're scammers??) neither of you can benefit from gains from trade.
However, suppose both of you know of some entity that both of you trust. That entity can act as a trusted escrow. The entity provides you security: this enables the trade, allowing both of you to get gains from trade.
In Bitcoin-land, this can be implemented as a 2-of-3 multisignature. The three signatories in the multisgnature would be you, the gewgaw seller, and the escrow. You put the payment for the gewgaws into this 2-of-3 multisignature address.
Now, suppose it turns out neither of you are scammers (whaaaat!). You receive the gewgaws just fine and you're willing to pay up for them. Then you and the gewgaw seller just sign a transaction --- you and the gewgaw seller are 2, sufficient to trigger the 2-of-3 --- that spends from the 2-of-3 address to a singlesig the gewgaw seller wants (or whatever address the gewgaw seller wants).
But suppose some problem arises. The seller gave you gawgews instead of gewgaws. Or you decided to keep the gewgaws but not sign the transaction to release the funds to the seller. In either case, the escrow is notified, and if it can sign with you to refund the funds back to you (if the seller was a scammer) or it can sign with the seller to forward the funds to the seller (if you were a scammer).
Taproot helps with this: like mentioned above, it allows multisignature setups to produce only one signature, reducing blockchain space usage, and thus making contracts --- which require multiple people, by definition, you don't make contracts with yourself --- is made cheaper (which we hope enables more of these setups to happen for more gains from trade for everyone, also, moon and lambos).
(technology-wise, it's easier to make an n-of-n than a k-of-n, making a k-of-n would require a complex setup involving a long ritual with many communication rounds between the n participants, but an n-of-n can be done trivially with some moon math. You can, however, make what is effectively a 2-of-3 by using a three-branch SCRIPT: either 2-of-2 of you and seller, OR 2-of-2 of you and escrow, OR 2-of-2 of escrow and seller. Fortunately, Taproot adds a facility to embed a SCRIPT inside a public key, so you can have a 2-of-2 Taprooted address (between you and seller) with a SCRIPT branch that can instead be spent with 2-of-2 (you + escrow) OR 2-of-2 (seller + escrow), which implements the three-branched SCRIPT above. If neither of you are scammers (hopefully the common case) then you both sign using your keys and never have to contact the escrow, since you are just using the escrow public key without coordinating with them (because n-of-n is trivial but k-of-n requires setup with communication rounds), so in the "best case" where both of you are honest traders, you also get a privacy boost, in that the escrow never learns you have been trading on gewgaws, I mean ewww, gawgews are much better than gewgaws and therefore I now judge you for being a gewgaw enthusiast, you filthy gewgawer).

Taproot and Your Contracts, Part 2: Cryptographic Boogaloo

Now suppose you want to buy some data instead of things. For example, maybe you have some closed-source software in trial mode installed, and want to pay the developer for the full version. You want to pay for an activation code.
This can be done, today, by using an HTLC. The developer tells you the hash of the activation code. You pay to an HTLC, paying out to the developer if it reveals the preimage (the activation code), or refunding the money back to you after a pre-agreed timeout. If the developer claims the funds, it has to reveal the preimage, which is the activation code, and you can now activate your software. If the developer does not claim the funds by the timeout, you get refunded.
And you can do that, with HTLCs, today.
Of course, HTLCs do have problems:
Fortunately, with Schnorr (which is enabled by Taproot), we can now use the Scriptless Script constuction by Andrew Poelstra. This Scriptless Script allows a new construction, the PTLC or Pointlocked Timelocked Contract. Instead of hashes and preimages, just replace "hash" with "point" and "preimage" with "scalar".
Or as you might know them: "point" is really "public key" and "scalar" is really a "private key". What a PTLC does is that, given a particular public key, the pointlocked branch can be spent only if the spender reveals the private key of the given private key to you.
Another nice thing with PTLCs is that they are deniable. What appears onchain is just a single 2-of-2 signature between you and the developemanufacturer. It's like a magic trick. This signature has no special watermarks, it's a perfectly normal signature (the pledge). However, from this signature, plus some datta given to you by the developemanufacturer (known as the adaptor signature) you can derive the private key of a particular public key you both agree on (the turn). Anyone scraping the blockchain will just see signatures that look just like every other signature, and as long as nobody manages to hack you and get a copy of the adaptor signature or the private key, they cannot get the private key behind the public key (point) that the pointlocked branch needs (the prestige).
(Just to be clear, the public key you are getting the private key from, is distinct from the public key that the developemanufacturer will use for its funds. The activation key is different from the developer's onchain Bitcoin key, and it is the activation key whose private key you will be learning, not the developer's/manufacturer's onchain Bitcoin key).
So:
Taproot lets PTLCs exist onchain because they enable Schnorr, which is a requirement of PTLCs / Scriptless Script.
(technology-wise, take note that Scriptless Script works only for the "pointlocked" branch of the contract; you need normal Script, or a pre-signed nLockTimed transaction, for the "timelocked" branch. Since Taproot can embed a script, you can have the Taproot pubkey be a 2-of-2 to implement the Scriptless Script "pointlocked" branch, then have a hidden script that lets you recover the funds with an OP_CHECKLOCKTIMEVERIFY after the timeout if the seller does not claim the funds.)

Quantum Quibbles!

Now if you were really paying attention, you might have noticed this parenthetical:
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash...)
So wait, Taproot uses raw 32-byte public keys, and not public key hashes? Isn't that more quantum-vulnerable??
Well, in theory yes. In practice, they probably are not.
It's not that hashes can be broken by quantum computes --- they're still not. Instead, you have to look at how you spend from a P2WPKH/P2PKH pay-to-public-key-hash.
When you spend from a P2PKH / P2WPKH, you have to reveal the public key. Then Bitcoin hashes it and checks if this matches with the public-key-hash, and only then actually validates the signature for that public key.
So an unconfirmed transaction, floating in the mempools of nodes globally, will show, in plain sight for everyone to see, your public key.
(public keys should be public, that's why they're called public keys, LOL)
And if quantum computers are fast enough to be of concern, then they are probably fast enough that, in the several minutes to several hours from broadcast to confirmation, they have already cracked the public key that is openly broadcast with your transaction. The owner of the quantum computer can now replace your unconfirmed transaction with one that pays the funds to itself. Even if you did not opt-in RBF, miners are still incentivized to support RBF on RBF-disabled transactions.
So the extra hash is not as significant a protection against quantum computers as you might think. Instead, the extra hash-and-compare needed is just extra validation effort.
Further, if you have ever, in the past, spent from the address, then there exists already a transaction indelibly stored on the blockchain, openly displaying the public key from which quantum computers can derive the private key. So those are still vulnerable to quantum computers.
For the most part, the cryptographers behind Taproot (and Bitcoin Core) are of the opinion that quantum computers capable of cracking Bitcoin pubkeys are unlikely to appear within a decade or two.
So:
For now, the homomorphic and linear properties of elliptic curve cryptography provide a lot of benefits --- particularly the linearity property is what enables Scriptless Script and simple multisignature (i.e. multisignatures that are just 1 signature onchain). So it might be a good idea to take advantage of them now while we are still fairly safe against quantum computers. It seems likely that quantum-safe signature schemes are nonlinear (thus losing these advantages).

Summary

I Wanna Be The Taprooter!

So, do you want to help activate Taproot? Here's what you, mister sovereign Bitcoin HODLer, can do!

But I Hate Taproot!!

That's fine!

Discussions About Taproot Activation

almkglor your post has been copied because one or more comments in this topic have been removed. This copy will preserve unmoderated topic. If you would like to opt-out, please send a message using [this link].
[deleted comment]
[deleted comment]
[deleted comment]
submitted by anticensor_bot to u/anticensor_bot [link] [comments]

PDQ Deploy packs v71.0.0 (2020-06-12)

Background

This is v71.0.0 (v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.009.20063
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.387 (Chrome)
  • Adobe Flash Player v32.0.0.387 (Firefox)
  • Adobe Flash Player v32.0.0.387 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.48.1
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v83.0.4103.97
  • Google Chrome Enterprise v83.0.4103.97 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.4
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v77.0.1
  • Mozilla Firefox v77.0.1 (x86)
  • Mozilla Firefox ESR v68.9.0
  • Mozilla Firefox ESR v68.9.0 (x86)
  • Mozilla Thunderbird v68.9.0 (x86) (customized; read notes)
  • Notepad++ v7.8.7 (x86)
  • Pale Moon v28.10.0
  • Pale Moon v28.10.0 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.10 -- ! NOTE: Switched to x64 only (dropped x86 package)
  • WinSCP v5.17.6 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (empty recycle bin to empty for every user on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

PDQ Deploy packs v71.0.0 (2020-06-12)

Background

This is v71.0.0 (v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.009.20063
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.387 (Chrome)
  • Adobe Flash Player v32.0.0.387 (Firefox)
  • Adobe Flash Player v32.0.0.387 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.48.1
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v83.0.4103.97
  • Google Chrome Enterprise v83.0.4103.97 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.4
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v77.0.1
  • Mozilla Firefox v77.0.1 (x86)
  • Mozilla Firefox ESR v68.9.0
  • Mozilla Firefox ESR v68.9.0 (x86)
  • Mozilla Thunderbird v68.9.0 (x86) (customized; read notes)
  • Notepad++ v7.8.7 (x86)
  • Pale Moon v28.10.0
  • Pale Moon v28.10.0 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.10 -- ! NOTE: Switched to x64 only (dropped x86 package)
  • WinSCP v5.17.6 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to pdq [link] [comments]

Escape from Tarkov New Player Guide 2.0: 75 Pages and packed with all the information you could ever need for success!

Introduction

Greetings, this is dumnem, also known as Theorchero, but you can call me Theo. I'm an experienced Tarkov player and I'm writing this guide to try and assist new Tarkov players learn the game, because it has one hell of a learning curve. We'll be going over a lot of different aspects of this guide, and it is going to be huge. Feel free to digest this in parts.
Additionally, this is a work in progress. I will write as much as I can in one Reddit post, but subsequent parts will be in additional comments. Google Docs Version (Note: Link is placeholder atm, but here is a sneak preview!)
Disclaimer: Tarkov recently updated to .12! That's a HUGE amount of information that I need to update. Please be patient! If there is anything I have gotten wrong or may have omitted, please let me know.
This is Primarily directed towards Tarkov Novices, but should be useful for even Tarkov Veterans. It hopefully includes everything you need to know to be able to go into a Raid equipped for success and to successfully extract with gear.
Want to play with friends? Want to have fun and learn Tarkov? Check out my discord here.

Changelog

3/9/20:
  • [Updated for .12]
  • Money making strategies completed.
  • Minor grammar adjustments, adding additional medical items.
  • Added additional resources, updated old ones.
  • Hideout section complete

Table of Contents

  • Tarkov Overview - What is Escape from Tarkov?
  • Tarkov Resources - Useful links
  • Tarkov's Maps
  • Tarkov's Health System
  • Tarkov's Hideout System
  • Tarkov's Quest System and Progression
  • Tarkov's Hotkeys to Know
  • Getting Started
  • Player Scavs
  • New Player's loadouts - LL1 Traders
  • What to Loot - How to get the most money per slot
  • Stash Management - How to combat Gear Fear
  • Tarkov Economy - How do I make money?
  • What now?

Tarkov Overview - What is Escape from Tarkov?

Escape from Tarkov is a tactical, realistic, FPS with MMO elements developed by Battlestate Games. It is currently in closed Beta. The game features several maps in which your primary character, your PMC, goes into Raids in order to find and salvage loot and useful equipment to survive and thrive in Tarkov. Death is very punishing in Tarkov. If you die you lose everything you had on you when you die (with the exception of what's inside your Container and your melee weapon) including any equipment you brought with you or what you found inside the Raid.
Enemies can be players (PMCs) or Scavengers ('Scavs') that are either controlled by AI or by players. Unlike many shooters, AI enemies in Tarkov are deadly - they can and will kill you on sight. They have recently been upgraded to act more intelligently, shoot more accurately, and react to situations on the map, such as investigating noise of gunfire or searching. It features beautiful and immersive environments, intricate and in-depth weapon modification system, a complex health system, dynamic and specific loot placement, and multiple options for engagement. Do you want to play slow and stealthy, to avoid fights, or set up a deadly ambush on an unwary foe? Or do you prefer raw combat, where only your quick wit, placements of shots, and tenaciousness determines who gets out alive? It's your Tarkov. You make the rules.

Tarkov Resources - Useful links

I take no credit or responsibility for any of the content in these links. To the best of my knowledge, these are updated consistently and are accurate, but user beware.

Quick-Reference Ammo Chart

An updated ammo chart can be found on the wiki.

Tarkov Wiki

Absolutely fantastic resource. You can visit them here.
It is a massive collection of everything that we players have been able to find.
They contain trades, user-created maps, lists of ammo, parts, weapons, loot, etc. If it's in the game, it's on the Wiki, somewhere.
I highly recommend opening the wiki page for the Map that you plan on raiding in.
Factory
Customs
Woods
Shoreline
Interchange
Reserve
The Lab ('Labs')

Map Keys and You

Huge collection of all the keys in the game. These are also on the wiki, but this page has them all on one page, and tries to inform the user if the key is worth keeping or using.
Check it out here.
This section is open to revision. Mention me in a thread (or in the comments below) about a resource and I'll see about adding it here.

Tarkov's Weapon Compatibility Guide

Pretty self explanatory. Also includes a Key guide and a Mod guide.
Check it out here.

HUGE Reference Bible by Veritas

Courtesy of Veritas (Send me his reddit username?), It's located here. (Open in new tab.) Contains: Detailed information about: Ammunition, Health, Firearms, Body Armor, Helmets, Rigs & Backpacks, Labs & Quest keys. Outdated! Needs to be updated for .12

Offline Raids - Player Practice

Offline raids is a feature added for testing and learning purposes for both new and veteran players alike. It is an incredibly useful tool.
In an offline raid, your progress is not saved. This means you don't keep anything you find, keep any experience 'earned' if you successfully extract, or lose any gear when/if you die. To access OFFLINE Raids, head into a Raid normally until you see this screen. Then Check the box indicating that you want to do an OFFLINE raid and you're good to go! You even have a choice on whether or not to add AI. You can also control how many AI enemies spawn, fewer than normal or a great deal more! You can even make Scavs fight each other. (Framerates beware.)
You can control how many scavs spawn (if any) as well as a number of other paramaters. New players should use offline raids as a tool to practice shooting, controls, movement, etc.

Tarkov's Maps

Tarkov features several maps - ranging from wide, beautiful vistas to ruined factory districts, to an abandoned laboratory where illegal experiments were being conducted. It is important to learn the maps you intend to play. In order to keep your gear, you must 'extract' at one of your designated exfiltration points. Not all extracts will be active every game, and some are conditional.

To see what extracts are available to you, double tap 'O' to show raid time and your exfils. If it has a ???? it might not be open.

Factory

Gate 3 Extract
A small, fast-paced map that was primarily created for PvP. Scavs spawn in all the time. Very close quarters, shotguns and SMGs tend to dominate here. PMCs can only access one Exit (Gate 3) without the Factory Exit Key. Good place to go if you need PMC kills as action is pretty much guaranteed. It is recommended NOT to bring in a lot of gear to Factory until you are experienced.
Factory Map in PvP is best played in Duos - due to the layout of the map, a Maximum of 6 PMCs may be present in the game. Due to the split spawn points, you effectively have 'sides' that have up to 3 spawn locations that are close together. This is why it is recommended to secure/scout enemy spawn locations. If you go in with a Duo, you at max have 2 players on your side for an even 2v2, and if played smartly you can eliminate them and know your 'side' is secure from aggression for the time being.
Upon loading in, scavs usually take a couple minutes to spawn, though this depends on the server in question and isn't super reliable. For new players, the best loadout in Factory is going to be a MP-153 Loadout - using just an MBSS (or similar bag) and ammo in your pocket to fight other players and Scavs. Scavs will often spawn with AKs and other 'vendorable' weapons, so is a good source of income.
Factory is also one of the best maps to Scav into, as Scavs can typically avoid the Exit camping strategy employed by a lot of weaker or newer players in order to secure gear, because they typically have extra exfiltrations whereas PMCs without the Factory Exit Key are stuck using Gate 3.
If you go in with a modicum of gear, it is recommended to keep at least a flashbang (Zarya) in your container. This will allow you to quickly slot it into an empty chest rig or pocket so you can throw it into the exit door, this will flash enemies and is cheap to do - the one time you survive because you flashed the 3 exit campers using shotguns will make this strategy extremely valuable.

Customs

Extract map
A fairly large map that was recently expanded and is expected to receive an overhaul within a patch or two, due to the choke point design of the map. Essentially, players spawn either on 'warehouse' or 'boiler (stacks)' side. If you see a large red warehouse ('big red') near you (Customs Warehouse), then you spawned on the warehouse side. If you don't, you likely spawned near Boiler side. Players can also spawn in several places in the woods North of boilers.
This map has the most quests in the game. Geared players often come to customs to challenge other squads over Dorm loot and to fight a Scav boss. New players are usually trying to do one of several early quests, such as ‘Debut’ which tasks them with killing 5 scavs on Customs and acquiring 2 MR-133 shotguns (pump shotties) from their corpses. Construction is also a popular hotspot as it has a lot of scav spawns as well as the location for the Bronze Pocketwatch, which is Prapor’s second quest.
Customs itself does not offer very much loot on average. There are several spots which can contain decent, but the vast majority is located in a couple different locations.
Dorms is the best loot location for Customs. It has two sets, 2 story and 3 story dorms. They each have their own sections of good loot, but the best is considered to be 3 story dorms, due to the presence of the Marked Room. The marked room requires a marked key to open, and has a good chance to spawn rare loot, such as keytools, documents cases, weapons cases, and high-end weapons. Due to the nature of the high value of this room, it’s almost always contested and it’s one of the best rooms in the game to farm, albeit with difficulty to successfully extract with the loot found. Note, though the key required has a maximum amount of uses, it is a fairly cheap key, and worth buying if you like to run customs and go to Dorms.
Dorms also has a ton of early quests (Operation Aquarius, for one) with some keys being valuable to use, but most dorms keys aren’t worth that much on the market. There’s too many to list here, but make sure to check the Map Keys and You at the top of the guide to determine what the value of a particular key is.
Checkpoint (Military Checkpoint) is also a decent loot spot, though not nearly as good as Dorms. If you have the key, it has a grenade box and 2 ammo boxes which can spawn good ammo. The jacket in the blue car also can spawn good medical keys as well as medical items. It is very close to the gas station, so I’ll include that here as well.
The Gas Station is one of the possible spawn locations for the scav boss. It has loose food items, a weapon box in the side room, with two keyed rooms leading to a safe and a med bag and box. Also contains a couple registers and food spawns on the floor. The emercom key can spawn on the seat in the ambulance out front.
North of the gas station is the Antenna, which contains 3 weapon boxes, a tool box, and a med bag. Possible location for scav boss spawn, albeit rarely, and also spawns regular scavs, like checkpoint and gas station.
Beyond that, there’s scattered loot around the map in different places, but usually not enough to warrant going out of your way for. There’s also scav caches, mostly around the middle road outside construction and around the boiler area.
The scav boss for customs is 'Reshala.’ He has 5 guards that have above-average gear and can be tough to deal with solo. The guards tend to be more aggressive than normal scavs, so they can be a lot to handle but are vulnerable to fragmentation grenades or flashbangs due to their close proximity to one another. Reshala himself has a good chance to have one or more bitcoin in his pockets, as well as his unique Golden TT, which is required for a Jaegar quest and used in conjunction with other Golden TT's to purchase a Tactec, good plate carrier. Reshala may spawn either Dorms (either bldg), New Gas Station, or rarely the tower north of the gas station. Scav bosses are dangerous enemies with escorts that have above-average loot (sometimes great loot) and are hostile to everyone, Including player scavs. Scav guards will approach a player scav and basically tell them to leave the area, and if they walk closer towards the scav boss they turn hostile.
The ‘official’ spawn rate for Reshala is 35%.

Woods

Woods Map with Exfil
A very large map that is mostly just a large forest, with the occasional bunker, and the Lumber Mill in the center. The Lumber Mill is the primary point of interest, as it contains a couple quest locations and is the primary location to farm Scavs, as Scavs killed on woods are a good source of end-game keys that are hard to find.
Since the map is so large and open, sniper rifles with scopes usually reign king here. You will see a lot of players with Mosin rifles as they are a cheap way to train the Sniper skill (for a quest later on) and are capable of killing geared players and scavs alike.
Overall, not usually very populated. An early quest from Prapor sends you here to kill a number of Scavs. A good map to learn the game, as although the loot is not fantastic, you can get experience with how the game runs and operates while fighting AI and possibly getting lucky with a key find off a scav.
As of .12, Woods now houses a Scav boss that acts as a Sniper scav. He is incredibly dangerous and usually carries a tricked-out SVDS. The 7.62x54 caliber is not to be underestimated. That caliber can and will wreck your shit through what most players are capable of wearing, especially early on in a wipe. He may also carry an AK-105, so he's going to be dangerous at both short and long ranges.
He has two guards, and he typically patrols the area around the Sawmill, and carries a key to a cache nearby full of goodies. His key is part of a quest for Jaegar.
Woods also has two bunkers, one of them being an extract and requiring a key. Both bunkers have some moderate loot in them, thus worth visiting, though not necessarily worth going out of your way for them. Several quests occur around the sawmill area, which contains a good couple keys that can spawn.

Shoreline

Shoreline Map, with Loot, Exfil, etc
A very large map, notorious for its FPS hit. Generally speaking, one of the better maps for loot. The primary point of interest is the Resort, but scavs spawn there, and is primarily occupied by hatchlings (players only with hatchet, ie melee weapon) and geared players. Resort has great loot, but requires keys to access most of it.
A great map to learn though from new players as the outskirts still contains plenty of loot and combat opportunities with AI scavs. You can hit Villa, Scav Island, Weather station, Docks, etc and come out with a backpack full of valuable gear fairly easily. The Village (Not to be confused with villa) contains a lot of toolboxes which can contain lots of parts used to upgrade your Hideout.
Location of many quests, including a large quest chain where players are required to kill many, many, scavs on Shoreline. For this and other reasons, probably the best map for new players to learn the game with.
A good loot route is to hit the village (caches in it), scav island (2 med bags, 2 toolboxes, 2 weapon boxes, 1 cache), burning gas station (weapon boxes and a safe), pier (potential extract, 2 pcs 2 safes and lots of filing cabinets), and weather station. Scavs may spawn around these areas, but most players just head straight for resort anyway, so you are much less likely to encounter them, especially if you avoid Mylta power (most players hit it on the way to or leaving from the resort). Excellent route as a player scav as well.

Interchange

Detailed map
Great, great loot area, but very complex map. Old computers might face unique struggles with this map. Features a mostly-binary exfil system like Shoreline, but.. kinda worse. Exfil camping is fairly common on this map, but usually avoidable. Huge map with multiple floors and many many different stores. Communication with teammates is a challenge on this map, but the map is also fantastically detailed.
This map features a lot of loot that depends on the kind of store you're in. It's a great place to farm rare barter materials which are valuable to sell on the Flea market or to use for quests or for hideout upgrades. An early quest (from Ragman) sends you here to kill a large amount of Scavs. I'd recommend getting Ragman to level 2 and accepting his quest asap when going to Interchange, as getting this quest done can take a while as it is and you want all scav kills to count towards progress.
Both the tech stores (Techlight, Techxo, Rasmussen) and department stores (Groshan, Idea, OLI) are the primary places to hit. There’s also Kiba (weapons store) as well as Emercom and Mantis. Players have different strategies, but this map is unique in the sense that it really rewards exploring. Most stores will have things you can grab that are worth quite a bit but are often overlooked. Very popular place to go in as a Player Scav.

Reserve

Brand new map, chock full of loot. Has more complex extracts than other maps, save for Labs. Excellent place to farm rare barter items, computer parts, and especially military hardware. PMCs have limited extracts, most being conditional, and the ones that aren’t require activation of ‘power’ to turn on the extract, which alerts the map the extract has been opened and can spawn Raiders (more on them below.)
Additionally, has a scav boss by the name of Glukhar, who has multiple heavily armed guards. He has multiple spawn locations and can arrive with the train.

The Lab ('Labs')

Here's a map.
DISCLAIMER: Labs, like much of Tarkov, is under constant development, so issues may be fixed or created without warning. Always check patch notes!
Labs is a very complex map compared to the rest of Tarkov. There is a great deal more exfiltrations but many of them have requirements or a sequence of events needed to be able to extract from them. It is recommended to read the Tarkov Wiki on Labs before raiding there.

LABS IS NOT LIKE OTHER MAPS. READ THIS SECTION CAREFULLY.

Labs is a lucrative end-game raid location, comparable to 'dungeons' in other games. They are populated by tougher enemies that give greater rewards. In order to go to labs, you need to acquire a keycard, this functions like mechanical keys but instead of opening a door, they unlock your ability to select Labs for a raid.
They may be found in-raid in various locations, most notably in scavs backpacks, pockets, and in filing cabinets. They may be purchased from Therapist at LL4 for 189K Roubles. Labs are populated by a unique kind of AI enemy, Raiders.

Raiders

Raiders are the Labs form of Scavs, or AI enemies. However, unlike other maps, they cannot contain player Scavs. Raiders have a much tougher than your average scav, they are capable of advanced tactics (such as flanking) and throw grenades and use other consumables as a player would. Once 'locked' onto you, they are typically capable of killing you very quickly, even if you are wearing high-end armor.
In Tarkov, Raiders act like the avatars of Death. They are clad in USEC and BEAR equipment, as they are effectively AI PMCs. Many changes have been made to labs and specifically how Raider AI works and to prevent exploits to easily farm them as well as bugs where they could be deadlier than intended.
A general rule of thumb is not to fight Raiders directly. They can and WILL kill you. Raiders can spawn with 7N9, or 'big boy' ammo. This ammunition type is incredibly lethal to players, even those wearing the toughest armor. If you get shot in the head, doesn't matter what kind of helmet, face shield, killa helmet, etc you are wearing, you will almost certainly die.
Because Raiders are controlled by AI, they have zero ping. They may also end to immediately respond as if you were aggressive even if they did not originally know you were there - ESP Raiders effectively will prone and return fire even as you ADS and put them in your sights.
This is why engaging a Raider must be done very, very carefully. There are a few strategies that you may employ, most commonly some form of baiting them towards an area and then killing them when they arrive. Players may accomplish this by generating noise - gunfire, melee weapon hitting walls, crates, etc, player deaths, players Mumbling (F1 by default) can all attract Raiders to investigate your area.
Due to the high power of Raiders, players often go in with minimal loadouts and seek to avoid conflict with other players, especially geared ones. Most players avoid PvP in Labs, though a good portion of the playerbase thoroughly enjoys hunting down poorly-geared players after they kill a few Raiders for them.
As such, players will lay prone in a hallway, or crouch in a room, and attract Raiders to enter their domicile by opening the door, and immediately headshotting them. Few Raiders actually wear helmets (though some do) so most players specialize in 'flesh ammo' or, ammunition that foregoes armor penetration in favor of raw damage in order to kill Raiders more reliably, because Raiders have slightly higher head health than PMCs do.
Raiders spawn with a great variety of equipment, weapons, armor, and materials such as medication or hideout parts. They tend to have chest armor and may have different helmets. Their pockets can contain Labs keycards, morphine, Ifaks, cash, and other items. They're always worth checking.
Raiders are a good source of grenades, they will often have F-1's and Zarya's in their rig or pockets that you can use to fight off players and Raiders alike.
Recently, changes have been made to Labs to make them less profitable so that other maps are more appealing. The cost and rarity of keycards increased, as well as reducing the frequency that raiders spawn, so that they come in more infrequent groups but also tighter in formation, while also lowering the overall output of individual Raiders, so that they are less likely to have a bunch of extra materials, such as grenades and other items.
Experience Farming on Labs
Labs is one of the best places to farm experience in the entire game. Killing a Raider with a headshot awards 1100 Experience. This does not include any looting, inspection (searching bodies), examine, streak, or other experience.
Killing a large sequence of Raiders gives additional bonus experience in the form of Streak rewards, usually 100 bonus exp per additional kill.
Surviving the raid multiplies all of these sources of experience by 1.5x
Changes coming to Labs
Disclaimer: I am not a BSG developer or employee. This is what I have seen on this subreddit and heard elsewhere. Some might be purely rumor, but other points are confirmed by Nikita Labs is undergoing constant changes. Nikita and BSG take feedback seriously, and always consider what the players are telling them. It known that Labs will eventually be accessed via the Streets of Tarkov map, and will require you to enter that map, make it to the labs entrance, and then extract from Labs to return to Streets of Tarkov and exfil from there as well. This will likely add an additional layer of risk to being ambushed for your goodies along your way out, as well as punishing damage taken in labs more severely. Additionally, keycards will have a limited number of uses, and may open more than one room.
The full extent of the changes coming is not known.
Remember, you can load a map in OFFLINE mode to practice against bots or to learn the map without fear of losing gear.

Tarkov's Health System

Tarkov Wiki Article
Tarkov has a very advanced health system, and while it might seem overwhelming at first, you'll get the hang of it rather quickly. It features a very wide variety of effects and injury, including hydration, energy, blood pressure, blood loss, fractures, contusion, intoxication, exhaustion, tremors and more.
Not all of the Health System is implemented yet. Expect changes!
Your character (PMC, or otherwise) has a combined Health of 435. Each of his limbs have separate health. Taking damage to a limb that reduces it to 0 'blacks' that limb. Blacked limbs are a problem. They greatly impair the activities your PMC performs, and taking damage in a blacked limb amplifies the damage by a multiplier and spreads that damage among your other non-black limbs equally. You cannot heal a blacked limb without the use of a Surgical Kit.
Notes: Bloodloss applies damage to the affected limb and can be spread like other damage to a blacked limb. Treat immediately. Also causes significant dehydration! Bloodloss also helps level your Vitality skill, which in turn gives you experience towards your Health skill, which is necessary to reach level 2 of in order to improve your hideout.
Losing a limb applies additional effects. Fractures also apply these effects but not the damage amplification (Except for damage if running on fractured leg.) Fractures require specialized medical kits to heal.
Dehydration is what happens when your Hydration level reaches 0. You can view your Hydration level in your gear page, at the bottom left. Becoming dehydrated is extremely bad. You take constant damage. Taking dehydration damage can kill you if you have a black chest or head. Restoring hydration helps train Metabolism, which improves positive effects from food and drink.
Head/Chest: Bullet damage resulting in losing your head or chest is instant death. Note: Bloodloss resulting in your Head/Chest being black does not result in death, but any damage to them beyond that point will! A back chest will causes you to cough (much like your stomach!)
Painkillers: Prevents coughing that comes from your chest. Doesn't help otherwise.
Stomach: Massively increased rate of dehydration and energy loss. You must find liquids or exit the Raid soon. Additionally, your PMC will cough sputter loudly, attracting attention. A black stomach multiplies damage taken by 1.5 and redistributes that damage across your entire health pool.
Painkillers: Significantly reduces the frequency and volume of the coughs.
Arms: Makes activities like searching, reloading, etc, take additional time, as well as adding a sway, reducing accuracy. Arms have a .7x damage multiplier.
Painkillers: Reduces sway, removes debuff Pain.
Legs: Blacked legs cause your PMC to stumble and be unable to run. Blacked legs have a 1x damage multiplier.
Painkillers: Allows you to walk at full speed and to run.
WARNING: Running while your legs are blacked or fractured WILL DAMAGE YOU.
Health Items
Tarkov features many health items - 'Aid' items, which can be used to restore your characters health and to fix ailments or injuries he receives as the result of combat or mishaps. The two most important health conditions to consider are bloodloss and fractures, which have both been covered above. Some food items may have ancillary effects, such as losing hydration.
Since in the current patch the only ailments to worry about are bleeding and fractures, it changes which health items are most necessary. We'll go over them below.

Health Restoration

Medical Items on Wiki
AI-2 medkit
The newb's medical kit. You receive several of these when you start Tarkov - they'll already be in your stash. Available from Level I Therapist, they are cheap and effective way of healing early in the game. They will not stop bloodloss. Because of this, you also need to bring bandages or a higher-grade medical kit. Affectionately called 'little cheeses' by the Tarkov community. Using it takes 2 seconds, and because of how cheap it is, it's often brought in by higher level players to supplement their healing without draining their main kit (which is capable of healing bloodloss or sometimes fractures). Due to its short use time, it's often very useful during combat as you can take cover and quickly recover damage taken to a vital limb. They're also useful as you can buy them from Therapist to heal yourself if you died in a raid.
Bandages
The newb's bloodloss solution. Available from Therapist at Level I. A better version, the Army Bandage is available at Level II, after a quest. Mostly obsolete after unlocking the Car Medical kit, but some players value them due to the Car's overall low health pool. Activating takes 4 seconds, and removes bloodloss to one limb.
Splint
The newb's solution to fractures. Cheap, takes five seconds to use, and takes up 1 slot. Fractures are much more common this patch, due to them being added back in the game from standard bullet wounds, not just drops. Available from Therapist at Level I, no quest needed. Can be used to craft a Salewa.
Alu Splint
More advanced form of the normal split. Works the same, but has up to 5 uses. Recommended to carry in your container if possible, due to frequency of fractures from gunfire.
CMS (Compact Medical Surgery) Kit
New medical item added in .12, fantastic item. Allows you to perform field surgery, removing the black limb state and allowing you to heal it beyond 0 hp. Takes 16 seconds to use, and cannot be cancelled so make sure you are safe if you are using it! Will reduce the maximum health of the limb it's used on by 40-55%, but will effectively remove all negative effects incurred by having a black limb. Highly recommended to carry in your container for emergencies. Can be bartered from Jaeger LL1, and purchased for roubles LL2.
Surv12 field surgical kit
Same as the compact surgical kit, but takes 4 seconds longer, and the health penalty is reduces to 10-20% max health of the limb. Considering this kit is 1x3, taking up a huge amount of space, it's probably not worth using. It's just too large. Better this than nothing, though.
Car Medical Kit
The newb's first real medical solution. Available LL1 as a barter (2 Duct Tape) and available for Roubles after completing Therapist's second quest. Has a larger health pool than AI-2's (220, vs AI-2's 100), and removes bloodloss. Takes up a 1x2 slot, so requires to be placed in a tactical rig in order to be used effectively. Cheap and fairly efficient, takes a standard 4 seconds to use. Rendered effectively obsolete when the Salewa is unlocked.
Often kept in a player's secure container as a backup health pool, before IFAKs are unlocked.
Salewa
Good medkit for use in mid and end-game. Contains 400 total health and can remove bloodloss. More rouble efficient form of a healing due to its high health pool, costs 13k roubles. Same size as the Car medical kit, so requires a tactical rig to use effectively. Because Tarkov does not currently have effects like Toxication in the game at the moment, this kit is favored by most players who go into a raid with at least a moderate level of gear. With a high health pool and relatively low cost, it's also a more efficient way of healing damage sustained while in raids. Unlocked at Therapist Level II after completing a level 10 Prapor quest, Postman Pat Part II. Required as part of Therapist's first quest, Shortage. This makes Salewas very valuable early on in a wipe as it gatekeeps the rest of Therapist's quests, most of which occur on Customs early on. Can be crafted in your meds station with a painkiller, splint, and bandage.
IFAK
Fantastic medical kit, and is the one preferred by most players. Features 300 health and the ability to remove bloodloss and a host of other negative effects that are not yet implemented into the game. It does not, however, remove fractures. Taking up only a single slot, it is favored by players in all stages of gear, and it is recommend to carry one in your Secure Container in case of emergencies. Is available at Therapist Level II for a barter (Sugar + Sodium), and may be purchased for Roubles at Level III after completing Healthcare Privacy, Part I. It is a fairly expensive kit, but due to its durability, its small size, and ability to remove bloodloss, it is a very common medical item used by players of all levels. Can be crafted in Lvl 2 medstation.
Grizzly
The 'big daddy' medical kit, boasting an impressive total health resource of 1800. It is also a very large kit, taking up 4 slots (2x2) - in order to be able to use this quickly, it would require specialized tactical rigs that feature a 2x2 slot. It removes all negative effects (some costing HP resource), including fractures. Used by highly-geared players who intend on staying in raids for an extended period of time, or by players with additional Secure Container space available in case of emergencies. It is available for barter at Therapist Level II, and purchase at Therapist Level 4. Due to its price point from Therapist at just under 23k Roubles and its healthpool of 1800, it is by far the most efficient method of healing from raid damage, at a 1.3 roubles per health, dramatically lower than other options available. Can be crafted in Lvl 3 medstation.

Pain Management

Using any of these items results in your character being 'On Painkillers' which allows you to sprint on fractured and blacked legs, as well as reducing effects of fractures and blacked limbs, and removing the debuff Pain. Essentially, the only difference between most of these items are the speed of use, price, availability, and duration of the effect. Note that the Hideout has changed how some of these items are used, and because Tarkov is under constant development, it is very likely that these materials may be used to create higher-grade medkits or to upgrade your medstation. That being the case, it's best to hoard the unknown items for now as efficiently as possible until you know you don't need them.
Analgin Painkillers
The holy grail of pain medication. "Painkillers" have 4 total uses. The total duration is greater than Morphine and less risk of waste. Takes a short time to use, and is available from Therapist Level 1 for both barter and Roubles. Makes a loud, distinctive gulping noise. Can be used to craft Salewa kits.
Morphine
Quick application of painkillers. Favored by some highly geared players as it has greater usability in combat then it's typical counterpart, Painkillers. Has a longer duration, but only one use. It is required for a fairly early Therapist (and a late Peacekeeper) Quest, so it is recommend to hoard 10 of them, then sell the rest unless you intend on using them. They are worth a good amount to Therapist and take up little space so they are a valuable loot item. Available from Therapist for Roubles at Level 4, after completing Healthcare Privacy, Part 3.
Augmentin
Basically a cheaper Morphine. One use, 205s. Not recommended over Painkillers due to its cost. No current barter for this item, so usually it's just a fairly expensive, small loot item. Most likely a component of a medstation manufacturing process or upgrade. Keep it.
Ibuprofen
Powerful painkiller. Lasts 500 seconds and has 12 uses. This item is recommended as your long-term solution for painkillers. While it is valuable because it's used to trade for THICC items case, it's the cheapest component and is very useful as a painkiller. It has a long duration and a large amount of uses, so keep it in your container for use as a painkiller if your primary painkillers wear off. Don't use it completely up, though. Keep the 1/12 bottles for the trade.
Vaseline
Powerful medical item. Cannot be purchased from dealers. Has a maximum of 10 uses. Removes Pain, applies Painkillers for 500 seconds (8.3 minutes). Useful to keep in your container as an alternative to Painkillers, though it takes 6 seconds to use, which is longer than other painkillers. Used as part of a barter trade for the Medcase.
Golden Star Balm
Fairly useful medical item. It can remove Pain and Contusion (not a big deal of a debuff, goes away on its own shortly) and provides a small bonus to hydration and energy. It also removes toxication and Radiation exposure, both of which are not yet implemented into the game. Like Vaseline, has a maximum of 10 uses. Painkiller effect lasts for 10 minutes, and takes 7 seconds to apply. Recommended to take only if you are going on large maps and you have extra room in your container. Can be used with Ibuprofen and 5x Med parts to craft 7 Propital.

Continued below in a series of comments, due to character limit.

submitted by dumnem to EscapefromTarkov [link] [comments]

Reviewing Rocket Pool: Why Was it Created?

Rocket Pool is an Ethereum infrastructure service. Individuals and companies wishing to earn interest on their Ether for a fixed period can use the decentralized network of Rocket Pool to participate in the staking. Exchanges, staking pools, and wallets can easily provide customers with stake verification services using the Rocket Pool API and its unique decentralized network of node operators.

Backstory

Since Ethereum was launched in 2015, it has been widely used in the crypto-world. And although it may have been in the shadow of Bitcoin for a long time, Ethereum 2.0 — the current update of the network — will enable the transition from Proof-of-Work to Proof-of-Stake algorithm.
Casper is the planned Ethereum network update that will move the blockchain from the PoW to PoS. Miners will be replaced by validators. The work of validators will not require hardware calculations — instead, it will be necessary to have a certain amount (steak) of coins on a special deposit.
The founders of Ethereum have repeatedly pointed out the undesirability of the emergence of large pools of validators, as this reduces the degree of decentralization of the system. However, the probability of assigning a validator to a block is weighted by the size of its deposit. So, large players may have additional votes in Ethereum development.

What is Rocket Pool?

Australian startup Rocket Pool has developed a validator pool platform that will allow Ether holders to earn with a deposit of 1 ETH instead of declared 32 ETH on the Beacon chain. Or just 16 ETH for a node operator. The minimum stake amount will vary, depending on the price of ETH.
Four other features of the Rocket Pool that may be attractive to users:
  1. Casper requires validators to be technically proficient at running an Ethereum node 24/7 and keeping that node online and secure. Rocket Pool takes care of this part by offering simple interfaces.
  2. The possibility of early withdrawal: validators do not have such an opportunity. Rocket Pool allows you to withdraw funds ahead of schedule in native rETH tokens with a commission of 5%. These tokens can be sold on the market.
  3. The user should know how to interact with smart contracts while registering with the Beacon chain. Rocket Pool undertakes the fulfillment of all interactions with Beacon chain contracts for the user.
  4. The Beacon chain will penalize users who make a deposit but cannot maintain their node on the network. The Rocket Pool uses a unique method called “chinking”, which significantly reduces the storage risk by distributing one storage across a decentralized network of nodes.

Key principles of the Rocket Pool

The process of transferring Ether from a user's wallet to a Casper stake consists of three steps:
  1. A user creates an ETH deposit on a smart contract and selects its term using a simple web application. Minimum 1 ETH, valid for 3, 6, or 12 months.
  2. Smart contracts “pack” ether into mini-pools with the same duration and integrate them into “smart nodes” that have technical resources (server, CPU, memory, bandwidth) as soon as they satisfy the minimum amount set by the protocol.
  3. Smart nodes make stakes on Casper, receive rewards for work, and distribute it. The system charges a fee, the amount of which depends on many factors, for example, the price of ETH, network reward, type of equipment, and the optimal number of mini-pools per node.

Rocket Pool Economic Model

The Rocket Pool economy consists of two types of tokens:
Rocket Pool Token (RPL) — is the protocol token that underlies the entire pool system. 18 million RPLs were sold at ICOs at the end of 2017. Its main function is to demonstrate to the whole network what deposit this smart node can count on — it should contain as many RPLs as this node can use in the rate, taking into account its technical characteristics (CPU, SSD, memory, network speed). In the future, a third-party hosting professional can become a smart node operator. The current price per RPL token is about $2.29.
Rocket Pool Beacon Chain ETH Token (rETH) enables deposits, staking rewards are paid out as rETH in order to give node operators and stakers liquidity before Serenity Phase 2.
An rETH:ETH pair can also be available during the integration with other token markets such as those on Uniswap. Thus, the users who withdraw on Rocket Pool can have their withdrawal converted to actual ETH if liquidity for the rETH pair on Uniswap is acceptable.
Of course, it’s up to you to decide whether to use it or not. Our responsibility is to keep you informed.
submitted by CoinjoyAssistant to ethtrader [link] [comments]

Air-gapped z-addresses; Is ZecWallet an option?

I've heard of Zcash for a while, but it wasn't until recently that I tried my hand playing around with the daemon and wallets.
Obviously, there's no point in using ZEC if you're only using t-addresses, but my desire for a z-address capable wallet certainly narrows the choice of wallets available to me.
Running a full node is no problem for me; I'd like to take advantage of a GUI if possible though. For that reason, I am drawn to ZecWallet's full node version. But I'm still uneasy when it comes to key security. (Can anyone share their experience with the ZecWallet paper wallet generator?)
From what I gather there is no wallet with HD support for t-addresses, is that right? Not much of a concern for me because I am interested in the shielded pool. I just figured t-addresses would support Electrum-style seeds but apparently not?
Sapling addresses seem to be exactly what I want; in particular I am drawn to their reusability and ability to export the view key. I was hoping this would ease the process of securing and backing up my private keys.
Here's my key handling protocol I use for Monero:
1) Generate the wallet on an air-gapped machine
2) This gives you a mnemonic seed. I write that down and keep it as an analog backup. By using a passphrase in conjunction with the seed, I can effectively encrypt this paper wallet easily.
3) Export the private view key and address to an online machine and make a watch-only wallet. This lets my watching wallet see incoming transactions
4) When outputs are received, I have to export the list of outputs to the air-gapped machine. The air-gapped machine uses this data to make signed key images.
5) I export the key images back to the watching wallet. At this point, the watching wallet can see outgoing transactions.
6) Now I can create unsigned transactions with the watching wallet, sign them in the air-gapped machine, and transmit them via the watching wallet using my full node.
The major benefit of using Monero in this way is that I only have to make a human-readable backup of my wallet once and I'm set for life.
Obviously, Zcash is going to be a little bit different. Since the core client doesn't give us mnemonic seed phrases, that complicates backup a little bit. What's the best way to back up ZEC? If I keep an up-to-date backup of my wallet.dat is that all I need? Is there an option in the wallet to encrypt this backup as well, or do I need to accomplish that externally with the likes of Veracrypt? I must admit the idea of unencrypted wallet data being written to my disk makes me uneasy.
I see that there is an option in zcash-cli to import/export the view key of Sapling addresses. However, I can't see the option to do so in ZecWallet, and when I do so manually via the CLI nothing seems to be reflected in ZecWallet.
Is ZecWallet by its very nature an obligatory hot wallet, or am I missing some functionality in the wallet?
My end goal is to run a ZEC full node on Qubes and hold my coins in z-addresses. Qubes allows me to make virtually air-gapped VMs to greatly simplify key management.
So for example when I use Bitcoin, I have a networked VM that runs a Bitcoind + Electrum Personal Server + Electrum Wallet stack, where I import my master public key. When I need to sign a transaction, I spin up a networkless VM equipped with Electrum and my private keys. Qrexec let's me easily ferry unsigned/signed transactions back and forth between the two VMs. Overall this provides a decent UX with above-average security and privacy. I'd like to port this general setup to Zcash.
To do so, I need a GUI wallet that supports both z-addresses and public/private key splitting. Does such a tool exist? (Can Electrum Personal Server be ported to ZEC?) If not, how can I streamline this process with the CLI?
I'm more familiar with Monero than Bitcoin, so the Zcash/Bitcoin CLIs are still a little foreign to me, though I am not "afraid" of CLI wallets in general. My Cryptonote muscle memory makes me prone to annoying little syntax errors I'd much rather do without.
My plan is to buy ZEC from Coinbase Pro, withdraw to a t-address, and then sweep my coins to a z-address. I want to monitor the balance of both t-addresses and z-addresses (and later send transactions) without ever exposing my private keys to the Internet.
However, it seems like the Zcash CLI is my only viable option for z-address watching wallets. Should I just play around on testnet until I get more familiar, or is there a GUI wallet solution out there that fits my needs? Does anyone have a cheat sheet for doing this via the CLI that could help me along the learning curve?
TL;DR New to Zcash, need advice as it relates to wallet backup, watching wallets, and z-addresses.
Assistance is much appreciated!
Edit: I don't suppose there's a way to use a Trezor Model T with a full node and or z-addresses?
submitted by spirtdica to zec [link] [comments]

Reviewing Rocket Pool: Why Was it Created?

Rocket Pool is an Ethereum infrastructure service. Individuals and companies wishing to earn interest on their Ether for a fixed period can use the decentralized network of Rocket Pool to participate in the staking. Exchanges, staking pools, and wallets can easily provide customers with stake verification services using the Rocket Pool API and its unique decentralized network of node operators.

Backstory

Since Ethereum was launched in 2015, it has been widely used in the crypto-world. And although it may have been in the shadow of Bitcoin for a long time, Ethereum 2.0 — the current update of the network — will enable the transition from Proof-of-Work to Proof-of-Stake algorithm.
Casper is the planned Ethereum network update that will move the blockchain from the PoW to PoS. Miners will be replaced by validators. The work of validators will not require hardware calculations — instead, it will be necessary to have a certain amount (steak) of coins on a special deposit.
The founders of Ethereum have repeatedly pointed out the undesirability of the emergence of large pools of validators, as this reduces the degree of decentralization of the system. However, the probability of assigning a validator to a block is weighted by the size of its deposit. So, large players may have additional votes in Ethereum development.

What is Rocket Pool?

Australian startup Rocket Pool has developed a validator pool platform that will allow Ether holders to earn with a deposit of 1 ETH instead of declared 32 ETH on the Beacon chain. Or just 16 ETH for a node operator. The minimum stake amount will vary, depending on the price of ETH.
Four other features of the Rocket Pool that may be attractive to users:
  1. Casper requires validators to be technically proficient at running an Ethereum node 24/7 and keeping that node online and secure. Rocket Pool takes care of this part by offering simple interfaces.
  2. The possibility of early withdrawal: validators do not have such an opportunity. Rocket Pool allows you to withdraw funds ahead of schedule in native rETH tokens with a commission of 5%. These tokens can be sold on the market.
  3. The user should know how to interact with smart contracts while registering with the Beacon chain. Rocket Pool undertakes the fulfillment of all interactions with Beacon chain contracts for the user.
  4. The Beacon chain will penalize users who make a deposit but cannot maintain their node on the network. The Rocket Pool uses a unique method called “chinking”, which significantly reduces the storage risk by distributing one storage across a decentralized network of nodes.

Key principles of the Rocket Pool

The process of transferring Ether from a user's wallet to a Casper stake consists of three steps:
  1. A user creates an ETH deposit on a smart contract and selects its term using a simple web application. Minimum 1 ETH, valid for 3, 6, or 12 months.
  2. Smart contracts “pack” ether into mini-pools with the same duration and integrate them into “smart nodes” that have technical resources (server, CPU, memory, bandwidth) as soon as they satisfy the minimum amount set by the protocol.
  3. Smart nodes make stakes on Casper, receive rewards for work, and distribute it. The system charges a fee, the amount of which depends on many factors, for example, the price of ETH, network reward, type of equipment, and the optimal number of mini-pools per node.

Rocket Pool Economic Model

The Rocket Pool economy consists of two types of tokens:
Rocket Pool Token (RPL) — is the protocol token that underlies the entire pool system. 18 million RPLs were sold at ICOs at the end of 2017. Its main function is to demonstrate to the whole network what deposit this smart node can count on — it should contain as many RPLs as this node can use in the rate, taking into account its technical characteristics (CPU, SSD, memory, network speed). In the future, a third-party hosting professional can become a smart node operator. The current price per RPL token is about $2.29.
Rocket Pool Beacon Chain ETH Token (rETH) enables deposits, staking rewards are paid out as rETH in order to give node operators and stakers liquidity before Serenity Phase 2.
An rETH:ETH pair can also be available during the integration with other token markets such as those on Uniswap. Thus, the users who withdraw on Rocket Pool can have their withdrawal converted to actual ETH if liquidity for the rETH pair on Uniswap is acceptable.
Of course, it’s up to you to decide whether to use it or not. Our responsibility is to keep you informed.
submitted by CoinjoyAssistant to EtherMining [link] [comments]

Reviewing Rocket Pool: Why Was it Created?

Rocket Pool is an Ethereum infrastructure service. Individuals and companies wishing to earn interest on their Ether for a fixed period can use the decentralized network of Rocket Pool to participate in the staking. Exchanges, staking pools, and wallets can easily provide customers with stake verification services using the Rocket Pool API and its unique decentralized network of node operators.

Backstory

Since Ethereum was launched in 2015, it has been widely used in the crypto-world. And although it may have been in the shadow of Bitcoin for a long time, Ethereum 2.0 — the current update of the network — will enable the transition from Proof-of-Work to Proof-of-Stake algorithm.
Casper is the planned Ethereum network update that will move the blockchain from the PoW to PoS. Miners will be replaced by validators. The work of validators will not require hardware calculations — instead, it will be necessary to have a certain amount (steak) of coins on a special deposit.
The founders of Ethereum have repeatedly pointed out the undesirability of the emergence of large pools of validators, as this reduces the degree of decentralization of the system. However, the probability of assigning a validator to a block is weighted by the size of its deposit. So, large players may have additional votes in Ethereum development.

What is Rocket Pool?

Australian startup Rocket Pool has developed a validator pool platform that will allow Ether holders to earn with a deposit of 1 ETH instead of declared 32 ETH on the Beacon chain. Or just 16 ETH for a node operator. The minimum stake amount will vary, depending on the price of ETH.
Four other features of the Rocket Pool that may be attractive to users:
  1. Casper requires validators to be technically proficient at running an Ethereum node 24/7 and keeping that node online and secure. Rocket Pool takes care of this part by offering simple interfaces.
  2. The possibility of early withdrawal: validators do not have such an opportunity. Rocket Pool allows you to withdraw funds ahead of schedule in native rETH tokens with a commission of 5%. These tokens can be sold on the market.
  3. The user should know how to interact with smart contracts while registering with the Beacon chain. Rocket Pool undertakes the fulfillment of all interactions with Beacon chain contracts for the user.
  4. The Beacon chain will penalize users who make a deposit but cannot maintain their node on the network. The Rocket Pool uses a unique method called “chinking”, which significantly reduces the storage risk by distributing one storage across a decentralized network of nodes.

Key principles of the Rocket Pool

The process of transferring Ether from a user's wallet to a Casper stake consists of three steps:
  1. A user creates an ETH deposit on a smart contract and selects its term using a simple web application. Minimum 1 ETH, valid for 3, 6, or 12 months.
  2. Smart contracts “pack” ether into mini-pools with the same duration and integrate them into “smart nodes” that have technical resources (server, CPU, memory, bandwidth) as soon as they satisfy the minimum amount set by the protocol.
  3. Smart nodes make stakes on Casper, receive rewards for work, and distribute it. The system charges a fee, the amount of which depends on many factors, for example, the price of ETH, network reward, type of equipment, and the optimal number of mini-pools per node.

Rocket Pool Economic Model

The Rocket Pool economy consists of two types of tokens:
Rocket Pool Token (RPL) — is the protocol token that underlies the entire pool system. 18 million RPLs were sold at ICOs at the end of 2017. Its main function is to demonstrate to the whole network what deposit this smart node can count on — it should contain as many RPLs as this node can use in the rate, taking into account its technical characteristics (CPU, SSD, memory, network speed). In the future, a third-party hosting professional can become a smart node operator. The current price per RPL token is about $2.29.
Rocket Pool Beacon Chain ETH Token (rETH) enables deposits, staking rewards are paid out as rETH in order to give node operators and stakers liquidity before Serenity Phase 2.
An rETH:ETH pair can also be available during the integration with other token markets such as those on Uniswap. Thus, the users who withdraw on Rocket Pool can have their withdrawal converted to actual ETH if liquidity for the rETH pair on Uniswap is acceptable.
Of course, it’s up to you to decide whether to use it or not. Our responsibility is to keep you informed.
submitted by CoinjoyAssistant to ethereum [link] [comments]

PDQ Deploy packs v70.0.0 (2020-03-31)

Background

This is v70.0.0 (v69.0.0, v68.0.0, v67.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.15 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.006.20042
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.344 (Chrome)
  • Adobe Flash Player v32.0.0.344 (Firefox)
  • Adobe Flash Player v32.0.0.344 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.47.2.1
  • Gimp v2.10.18 (x86)
  • Google Chrome Enterprise v80.0.3987.149
  • Google Chrome Enterprise v80.0.3987.149 (x86)
  • Google Earth Pro v7.3.2
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.6
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.2
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v74.0.0
  • Mozilla Firefox v74.0.0 (x86)
  • Mozilla Firefox ESR v68.6.0
  • Mozilla Firefox ESR v68.6.0 (x86)
  • Mozilla Thunderbird v68.6.0 (x86) (customized; read notes)
  • Notepad++ v7.8.5 (x86)
  • Pale Moon v28.9.0.2
  • Pale Moon v28.9.0.2 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.8 (x86)
  • WinSCP v5.17.2 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source, although donations are of course appreciated since all work done on them is in my spare time for free. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to pdq [link] [comments]

Reviewing Rocket Pool: Why Was it Created?

Rocket Pool is an Ethereum infrastructure service. Individuals and companies wishing to earn interest on their Ether for a fixed period can use the decentralized network of Rocket Pool to participate in the staking. Exchanges, staking pools, and wallets can easily provide customers with stake verification services using the Rocket Pool API and its unique decentralized network of node operators.

Backstory

Since Ethereum was launched in 2015, it has been widely used in the crypto-world. And although it may have been in the shadow of Bitcoin for a long time, Ethereum 2.0 — the current update of the network — will enable the transition from Proof-of-Work to Proof-of-Stake algorithm.
Casper is the planned Ethereum network update that will move the blockchain from the PoW to PoS. Miners will be replaced by validators. The work of validators will not require hardware calculations — instead, it will be necessary to have a certain amount (steak) of coins on a special deposit.
The founders of Ethereum have repeatedly pointed out the undesirability of the emergence of large pools of validators, as this reduces the degree of decentralization of the system. However, the probability of assigning a validator to a block is weighted by the size of its deposit. So, large players may have additional votes in Ethereum development.

What is Rocket Pool?

Australian startup Rocket Pool has developed a validator pool platform that will allow Ether holders to earn with a deposit of 1 ETH instead of declared 32 ETH on the Beacon chain. Or just 16 ETH for a node operator. The minimum stake amount will vary, depending on the price of ETH.
Four other features of the Rocket Pool that may be attractive to users:
  1. Casper requires validators to be technically proficient at running an Ethereum node 24/7 and keeping that node online and secure. Rocket Pool takes care of this part by offering simple interfaces.
  2. The possibility of early withdrawal: validators do not have such an opportunity. Rocket Pool allows you to withdraw funds ahead of schedule in native rETH tokens with a commission of 5%. These tokens can be sold on the market.
  3. The user should know how to interact with smart contracts while registering with the Beacon chain. Rocket Pool undertakes the fulfillment of all interactions with Beacon chain contracts for the user.
  4. The Beacon chain will penalize users who make a deposit but cannot maintain their node on the network. The Rocket Pool uses a unique method called “chinking”, which significantly reduces the storage risk by distributing one storage across a decentralized network of nodes.

Key principles of the Rocket Pool

The process of transferring Ether from a user's wallet to a Casper stake consists of three steps:
  1. A user creates an ETH deposit on a smart contract and selects its term using a simple web application. Minimum 1 ETH, valid for 3, 6, or 12 months.
  2. Smart contracts “pack” ether into mini-pools with the same duration and integrate them into “smart nodes” that have technical resources (server, CPU, memory, bandwidth) as soon as they satisfy the minimum amount set by the protocol.
  3. Smart nodes make stakes on Casper, receive rewards for work, and distribute it. The system charges a fee, the amount of which depends on many factors, for example, the price of ETH, network reward, type of equipment, and the optimal number of mini-pools per node.

Rocket Pool Economic Model

The Rocket Pool economy consists of two types of tokens:
Rocket Pool Token (RPL) — is the protocol token that underlies the entire pool system. 18 million RPLs were sold at ICOs at the end of 2017. Its main function is to demonstrate to the whole network what deposit this smart node can count on — it should contain as many RPLs as this node can use in the rate, taking into account its technical characteristics (CPU, SSD, memory, network speed). In the future, a third-party hosting professional can become a smart node operator. The current price per RPL token is about $2.29.
Rocket Pool Beacon Chain ETH Token (rETH) enables deposits, staking rewards are paid out as rETH in order to give node operators and stakers liquidity before Serenity Phase 2.
An rETH:ETH pair can also be available during the integration with other token markets such as those on Uniswap. Thus, the users who withdraw on Rocket Pool can have their withdrawal converted to actual ETH if liquidity for the rETH pair on Uniswap is acceptable.
Of course, it’s up to you to decide whether to use it or not. Our responsibility is to keep you informed.
submitted by CoinjoyAssistant to u/CoinjoyAssistant [link] [comments]

Bitcoin mining pool - BTC.com tutorial How To Setup A Mining Pool - Part 1 Crypto Mining Pool Server Setup Vlog #2 Crypto Mining Pool Server Setup Vlog #3 How to Hack bitcoin server mining app

Despite recent controversy, Antpool remains the largest Bitcoin mining pool in terms of its Bitcoin network hash rate. Antpool holds roughly 15% of the total hash rate of all Bitcoin mining pools. About Antpool. Antpool mined its first block in March 2014, meaning that it emerged roughly four years after the first mining pool; Slushpool. There are 3 methods to go about setting up your own Bitcoin node as of right now, ranging from pretty technical and time-intensive to really easy but a little more expensive. As development and adoption of Bitcoin technology continue, this process will only get easier and cheaper. However, keep in mind that it is not an easy task and it requires a lot of time and effort and some in-depth knowledge of the matter. Here is a list of all the minimum requirements you will need to set up a Bitcoin Cash mining pool: VPS (Virtual Private Server) with at least: By default, Bitcoin Core allows up to 125 connections to different peers, 8 of which are outbound. You can therefore have at most 117 inbound connections. The default settings can result in relatively significant traffic consumption. Ways to reduce traffic: Maximum Upload Targets-maxuploadtarget=<MiB per day> The Bitcoin.com mining pool has the lowest share reject rate (0.15%) we've ever seen. Other pools have over 0.30% rejected shares. Furthermore, the Bitcoin.com pool has a super responsive and reliable support team.

[index] [12820] [21333] [30384] [5531] [14990] [15309] [5503] [521] [21826] [1271]

Bitcoin mining pool - BTC.com tutorial

Failed at focus in the beginning but recover after intro. That aside here is my vlog series for setting up the SOAT Mining Pool Server environment. Featuring re-purposed Dell Poweredge R720xd ... Another entry in the Crypto Mining Pool Server Vlog. Featuring re-purposed Dell Poweredge R720xd Google Search Appliances. Starwind: https://www.starwindsoftware.com My Rig Parts: Asrock H110 Pro ... Up next HACKING A BITCOIN CLOUD MINING! MINE UNLIMITED BITCOINS!! - Duration: 10:43. ... Bitcoin Server Mining App is SCAM - Duration: 1:58. ZIICK GAMING_YT 17,123 views. Another entry in the Crypto Mining Pool Server Vlog. Featuring re-purposed Dell Poweredge R720xd Google Search Appliances. My Rig Parts: Asrock H110 Pro BTC+... Dive in and start exploring the process of setting up a mining pool. Learn what you need to know before you select a pool to setup.

Flag Counter